The Deepsea 6120 Controller is a professional-grade generator control module manufactured in the UK, designed for reliable automatic operation of diesel/gas generator sets
Brand:
ZTAItem NO.:
ZDS6120Order(MOQ):
1Payment:
T/T 30%, 70% Before shipmentProduct Origin:
ChinaShipping Port:
Xiamen, ChinaLead Time:
4-5 weeksWeight:
1UK Deepsea 6120 7320 For Diesel Generator Set
The Deepsea 6120 7320 Controller is a professional-grade generator control module manufactured in the UK, designed for reliable automatic operation of diesel/gas generator sets. This microprocessor-based unit provides comprehensive AMF (Automatic Mains Failure) and ATS (Automatic Transfer Switch) functionality, ensuring seamless power transitions for critical applications.
Key Features & Technical Advantages
1. Intelligent Control System
2. Protection & Safety
3. User-Friendly Operation
4. Robust Construction
Application Fields
1. Industrial Power Systems
2. Commercial Facilities
3. Marine & Offshore
4. Infrastructure
Climate Adaptations
Competitive Advantages
✔ UK Manufacturing: Precision engineering with traceable components
✔ Plug-and-Play: Pre-configured for most generator brands
✔ Future-Ready: Firmware upgradable via USB
Optional Modules:
Features of the Control Panel |
Basic Model (Standard) UK Deepsea 6120 |
Advanced Model (Optional) UK Deepsea 7320 |
||||||
Display Language | 18 | 18 | ||||||
Languages can be stored in the module | 2 | 7 | ||||||
3level permissions via front panel edit | - | ■ | ||||||
PIN Protection | ■ | ■ | ||||||
Customisable power up text and images | ■ | ■ | ||||||
Integral PLC editor | ■ (1024) | ■ (1024) | ||||||
Supports escape mode | ■ | ■ | ||||||
Redundant Feature | - | ■ | ||||||
Dual Mutual standby | - | ■ | ||||||
Internal buzzer | - | ■ | ||||||
USB communication | ■ | ■ | ||||||
RS232 port | - | ■ | ||||||
RS485 port | ■* | ■ | ||||||
Ethernet port | ■** | ■** | ||||||
SNMP protocol | ■*** | ■*** | ||||||
CAN port | ■ | ■ | ||||||
Modbus protocol | ■ | ■ | ||||||
Expansion compatibility | ■ | ■ | ||||||
Support Battery chargers | ■ | ■ | ||||||
Analogue inputs | 4 | 6 | ||||||
Digital inputs/outputs | 8/8 | 8/10 | ||||||
Alternative configuration | 2 | 6 | ||||||
Exercise Scheduler | ■ | ■ | ||||||
Data Logging Facility | 10 | 10 | ||||||
Event Log | 100 | 250 | ||||||
Auto mains Failure | ■ | ■ | ||||||
Cancel AMF detection | ■ | ■ | ||||||
ATS Control | ■ | ■ | ||||||
Closed transition support with check sync | - | ■ | ||||||
Instrumentation suppression | ■ | ■ | ||||||
Compatible with a wide range of CAN engines | ■ | ■ | ||||||
DTC ignore | ■ | ■ | ||||||
Support for 0V to 10 V Sensors | 2 | 2 | ||||||
Support for 4mA to 20mA sensors | 2 | 2 |
Features of the Control Panel |
Basic Model (Standard) UK Deepsea 6120 |
Advanced Model (Optional) UK Deepsea 7320 |
||||||
Sensor open circuit | ■ | ■ | ||||||
Overspeed protection | ■ | ■ | ||||||
Low oil pressure protection | ■ | ■ | ||||||
High coolant temperature protection | ■ | ■ | ||||||
Low fuel level alarm | ■ | ■ | ||||||
Abnormal fuel consumption alarm | - | ■ | ||||||
Fuel usage monitor | - | ■ | ||||||
Battery voltage protection | ■ | ■ | ||||||
Start on low battery | ■ | - | ||||||
Engine Pre--heat | ■ | ■ | ||||||
Engine post-heat | ■ | ■ | ||||||
Coolant heater control | ■ | ■ | ||||||
Fuel pump control | ■ | ■ | ||||||
Idle control for starting/stopping | ■ | ■ | ||||||
Charge alternator failure alamr(D+) | ■ | ■ | ||||||
Configurable maintenance alarms | ■ | ■ | ||||||
Maximum AC Voltage | 3 | 3 | ||||||
Power/Current detection | 719 | 719 | ||||||
Over/under voltage protection | ■ | ■ | ||||||
Over/under frequency protection | ■ | ■ | ||||||
Phase rotation alarm | ■ | ■ | ||||||
Overload /Low load protection | ■ | ■ | ||||||
Fail to close alarm | - | ■ | ||||||
Overcurrent protection | ■ | ■ | ||||||
IDMT Alarm | ■ | ■ | ||||||
Short circuit protection | ■ | ■ | ||||||
Negative phase sequence protection | - | ■ | ||||||
Earth fault protection | - | ■ | ||||||
Reverse power protection | - | ■ | ||||||
Positive/negative var | - | ■ | ||||||
Filter voltage display | ■ | ■ | ||||||
Supports High Voltage generator | ■ | ■ | ||||||
Dummy load ocntrol | ■ | ■ | ||||||
Delay load output | ■ | ■ | ||||||
Load shedding control | ■ | ■ | ||||||
Breaker control via fasciabuttons | ■ | ■ | ||||||
Auto Breaker control | ■ | ■ | ||||||
Instrumentation suppression | ■ | ■ |
Standard ■ Not Available:⏤⏤
Optional:★
*indicates that DSE857 communication module needs to be added.
**indicates that DSE855 communication module needs to be added.
***indicates that DSE892 communication module needs to be added.